View Full Version : m20 into a 318i
I have all the mechanical hooked up and 95% of the wiring. I need to know if anyone has put a m20 into a 318? I need the colour codes from the 318i harness and the colour codes from the 325i connector.I figure I will run this engine for a bit while I look for a good m50.Thing is it needs to run first..:D
02-10-2004, 07:30 PM
I told you i have the complete electrical teardown book for the e30's!! Holla atcha boy!
But you are pretty far away man. We would have to do it by phone or scan a few key pages.
02-11-2004, 12:48 AM
02-11-2004, 12:51 AM
I think #bryson"# a member from www.r3vlimited.com did the conversion his factory 318i witha m20, search for that name and ask him
Thanks for the help. Anyone else want to lend a hand I would appreciate it. This will give some valuble insight on how to upgrade to a m50 later on.
02-11-2004, 08:49 PM
can we help a brother out plase? i'm interested in this too!!
Ok This is From The Engine side of the plug on the 318i to the Chassis side of the plug on a 325i Engine.
Violet/green-Violet/red(both large guage)
Green/yellow-Green/yellow(both large guage)
Greeb-Green(both large guage)
Black/yellow-Black/yellow and (smallguage) black/green
Left on the 325i side You'll have a Yellow/White wire(Fuel rate ouput)
Black(Engine speed output)
Brown/black(Check Engine light)
Plus some other wires but I never found there functions.
I never tested this plug and made the conections based on the Feature that wire did and not it's color.
vBulletin® v3.8.1, Copyright ©2000-2017, Jelsoft Enterprises Ltd.