PDA

View Full Version : I Think This Is A Good Setup


beammer12000
02-10-2004, 04:22 PM
HERE IS SOMETHING THAT MY BROTHER AND I DESIGNED. THERE IS ALOT OF WORK DOING THIS BUT I THINK IT IS COME OUT VERY GOOD. WORK IS STILL IN PROGRESS.

beammer12000
02-10-2004, 04:24 PM
2

beammer12000
02-10-2004, 04:25 PM
3

beammer12000
02-10-2004, 04:26 PM
4

beammer12000
02-10-2004, 04:27 PM
5

beammer12000
02-10-2004, 04:27 PM
6

Mystikal
02-10-2004, 04:48 PM
Looks good. Who needs a trunk anyways. :P

BTW, what the heck is a ""BEAMMER"? *no-no*

SebSter
02-10-2004, 06:08 PM
lookin really nice, i like it

beammer12000
02-10-2004, 07:11 PM
I KNOW BIMMER WAS TAKEN:mad:

Albertae30
02-10-2004, 07:37 PM
how the hell did you get that rear deck out mine has a nasty coffee stain on it and is all faded and i wanted to take it out to clean and dye it

beammer12000
02-10-2004, 08:29 PM
PULL OUT THE BACK SEATS THEN REMOVE THE BOLTS THAT HOLD THE SEAT BELTS DOWN ON THE BOTTOM THEN CAREFULLY REMOVE THE BLACK PLASTIC COVERS WERE THE BELTS GO THRU THEN CAREFULLY YOU GOT TO POP UP THE PANEL CAUSE THEY HAVE CLIPS ON IT THEN SLIDE IT FORWARD. THAT SHOULD HELP YOU TO GET IT OUT. REMEMBER THE KEY WORD IS CAREFULLY

///MsAniTy
02-10-2004, 08:30 PM
hey the only problem u will have is gettin bass into the cabin. i have to pull down my rear seats to get bass into the cabin.

beammer12000
02-10-2004, 08:33 PM
NO TRUST ME I GET ENOUGH BASS IN THE CAR THE TIP IS TO DYNO MAT THE SHIT OUT OF YOUR TRUNK

///MsAniTy
02-10-2004, 08:34 PM
i did and trust me if u were to pull down your seats it would pound yr car wiht bass

beammer12000
02-10-2004, 08:39 PM
SEE THE PROBLEM WITH MY CAR IS THAT I CUSTOMIZED THE CROSS OVER THERE SO THAT AREA IS BLOCKED AND I STILL GET MORE THAN ENOUGH BASS CONSEDERING THE AMP THAT IS RUNNING THE SUBS IS NOT CRANKED ALL THE WAY

Mystikal
02-10-2004, 09:57 PM
Are those Cerwin HED-12's? I had one in my car up to about a month ago, the arctic weather + me on vacation for a week froze it up, as soon as I started the car the coils came apart. Ah well, it's getting fixed under warranty as we speak.

I already replaced it with a sweet Phoenix Gold sub, before I knew they were going to rebuild it for free. Meh.

Gianpaolo_E46
02-10-2004, 10:06 PM
my cousin had nightmares with cerwin subs...kept blowing over and over..and not just the same one he had a few of them keep blowing..nice set up, hope u have better luck with the subs than he did

Mystikal
02-10-2004, 10:14 PM
Yeah, I'm pretty much staying away from them. I'd kick my own ass if I spent the money on another low-quality product. Not saying I concluded to that yet, but if another one crapped out I would.

Hence, I went nuts and bought a Phoenix. :D

beammer12000
02-10-2004, 10:55 PM
no there 10 in heds and i havent had any problems yet. there not bad but the next set are going to be audiobahns

Miguel
02-11-2004, 08:16 AM
Originally posted by beammer12000
the next set are going to be audiobahns

NOOOOOOOOOooooooo

Powerslide
02-13-2004, 06:30 PM
NICE SETUP MAN IM GLAD YOU dont only use caps now. Id recommend some JLs if you're going to replace. Like Miguel said: audiobahns arent really the best way to go.

Boris The Blade
02-14-2004, 03:37 AM
NICE WORK!!! love it*th-up*

ierrahh
02-15-2004, 05:29 AM
Ya it looks really good

Jase
02-15-2004, 05:35 AM
So is the deck the port for the subs?. what ohms are the subs?

ROBM3
02-15-2004, 05:49 AM
e30's are the worst cars for car audio.

Looks nice though.

Jase
02-15-2004, 06:15 AM
We can't all drive hatchbacks like yours..

Albertae30
02-15-2004, 08:01 PM
my car isn't so bad due to the fact i ripped out my back seat to build a sub box. i get good sounds.

audiophile
02-20-2004, 08:09 AM
why must some people always type in capitals?

nice install- start houlioing

BMW BMXer
02-20-2004, 03:04 PM
It looks good. The setup of the trunk but I don't like any of the equipment that is being used.

beammer12000
02-22-2004, 04:25 AM
thanks for all the good feed back but to each there own?

BMW BMXer
02-22-2004, 07:04 AM
Originally posted by beammer12000
thanks for all the good feed back but to each there own?

For sure. Its a nice install regardless.

Mitch555
02-23-2004, 07:03 PM
Originally posted by beammer12000
HERE IS SOMETHING THAT MY BROTHER AND I DESIGNED. THERE IS ALOT OF WORK DOING THIS BUT I THINK IT IS COME OUT VERY GOOD. WORK IS STILL IN PROGRESS.

How long did it take you guys to get to that stage?

beammer12000
02-23-2004, 07:36 PM
so far its going on one year now but thats only doing it on week ends and if the weather is good. it should be done in the summer and will post new pics when it is finished.

beammer12000
02-23-2004, 07:46 PM
so far its going on one year now but thats only doing it on week ends and if the weather is good. it should be done in the summer and will post new pics when it is finished.

Mitch555
02-23-2004, 07:53 PM
Originally posted by beammer12000
so far its going on one year now but thats only doing it on week ends and if the weather is good. it should be done in the summer and will post new pics when it is finished.

Damn! Thatz quite a while. Looks good though! *th-up*

beammer12000
02-25-2004, 02:22 AM
thanks

beammer12000
02-29-2004, 04:16 AM
hey guys today my brother and i did more work on the system today we worked on the door panels take a look at this.

beammer12000
02-29-2004, 04:17 AM
2

beammer12000
02-29-2004, 04:18 AM
3 my bro sanding

beammer12000
02-29-2004, 04:19 AM
4

beammer12000
02-29-2004, 04:20 AM
5 alpine componet set

beammer12000
02-29-2004, 04:21 AM
6

beammer12000
02-29-2004, 04:21 AM
7

beammer12000
02-29-2004, 04:22 AM
8

beammer12000
02-29-2004, 04:23 AM
9

beammer12000
02-29-2004, 04:24 AM
10

beammer12000
02-29-2004, 04:25 AM
11

beammer12000
02-29-2004, 04:25 AM
12

beammer12000
02-29-2004, 04:26 AM
here's the last one for know more to come next week.

Mystikal
02-29-2004, 02:22 PM
Nice fabrication, but is that still a 5.25" opening?

John Hubbert
02-29-2004, 02:45 PM
Looks great guy's , I don't see any brown-bread , or Dynamat
though , Don't skimp now , that thing will rattle like hell without it.
Keep postin , can't wait to see that finished . Cheers !

beammer12000
02-29-2004, 03:06 PM
i know still got to put dyno mat

Lennon
02-29-2004, 04:12 PM
Oooooooooooooh, type R's, man, those are going to sound good. Whatcha got in the back?

beammer12000
02-29-2004, 04:18 PM
if you mean in the trunk i got 3 10in dual voice coil vegas

Miguel
03-01-2004, 08:22 PM
Originally posted by Lennon
Oooooooooooooh, type R's

*mw* Alpine goodness

audiophile
03-02-2004, 12:53 AM
why do you have to post in all capitals?

and if you're going to be elitist with that quote in your signature, at least spell "You're" properly. :rolleyes:

beammer12000
03-02-2004, 04:47 AM
here's another pic of the door pod with the door closed.

beammer12000
04-19-2004, 10:44 PM
here's the finished door pod with type r speakers

beammer12000
04-21-2004, 01:02 PM
heres the almost finished rear deck that house's my cd changer

BMW BMXer
04-21-2004, 03:38 PM
All this time I thought that was a port.

beammer12000
04-21-2004, 08:21 PM
i told you so many times that it was not a port that i was putting my changer in there.

windsor318is
04-22-2004, 03:36 AM
wow, nice work on the door builds and the trunk, ive almost finished my trunk as well

eagle
04-22-2004, 05:06 AM
nice work but the car is really dirty.. you'll have to clean that up... You're not afraid of dust on year laser beam of cd player, if I were you, I would remove it from the car... But I repeat myself nice work... is fiber glass stuff really expensive?????

BMW BMXer
04-22-2004, 05:36 AM
Originally posted by beammer12000
i told you so many times that it was not a port that i was putting my changer in there.

I don't read so well. :D

beammer12000
04-24-2004, 08:02 PM
no fiber glass material is cheap its working with the stuff that you got to know how to use but once you master the tecknic is straight sailing ahead.