PDA

View Full Version : Foglight HELP


HooliGaN*
11-13-2003, 07:08 PM
well i finnally have all my stuff for my foglights
id imagine its quite easy
if only someone could point me in the right direction
i have one question how do i install this switch?
what is the process involved to do this?


thanx


Julian

HooliGaN*
11-13-2003, 08:50 PM
bumpz0r
i jus really wanna know how i can access that area behind where the button is suppouse 2 be

WASABI
11-14-2003, 01:19 PM
You need to pop out the panel where the headlight switch is on, I think there is one screw under the vent (sorry forgot), then the panel comes out, you may have to pry it with a screwdriver, just wrap the tip with cloth before you do so. Check in the FAQ section for some tips off the DIY sites like this one:

http://www.maxbimmer.com/forums/showthread.php?threadid=11977

HooliGaN*
11-14-2003, 03:18 PM
ok that was easy enough
where i can i find the connection for the switch is it fastened somewhere or am i screwed
because that would b stupid if they made connections for my lights but no harness for the switch

Julian

WASABI
11-15-2003, 08:41 PM
There was no plug (plug should correspond to the one on the switch) anywhere near the panel that you took off? I'm not sure if all car's came with the wiring, sorry. If not, you're going to have to wire it up yourself. Find a 12V source, make sure to use a 12V relay, and make sure you fuse it all. Good luck!

BMWF1
11-18-2003, 10:26 PM
Pay the 70 Bucks