PDA

View Full Version : 3 Series FS: 1986 E30 Coupe, m52 swap


Chefskinny
02-07-2013, 05:15 PM
Putting this up to test the waters, could really use a wagon for work / day to day. I intended to use this car as driving school / track day fun car but had a crazy summer and never got around to it. All the aftermarket parts on the car have less than 10,000km's on them. Mileage is high but almost every wear part on the car, engine / suspension / brakes has been replaced. I bought all OEM parts, was building this car the right way. Car is very quick and a blast to drive, doesn't miss a beat.

Asking $7500

http://i1158.photobucket.com/albums/p617/chefskinny/Bimmer%20Build%20pics/4bc8bc88.jpg
http://i1158.photobucket.com/albums/p617/chefskinny/Bimmer%20Build%20pics/0ff0daac.jpg
http://i1158.photobucket.com/albums/p617/chefskinny/Bimmer%20Build%20pics/14f474a8.jpg

1986 325, Bronzit-Beige 2 door, 335,000km's.

-m52b28 obd2
100% Rebuilt with oem components, m52b28, m3 cams, m50 intake, TRM tuned ecu for above mods, dr vanos kit, Ebay headers, 3" exhaust - magnaflow cat to borla muffler to magnaflow muffler. Engine has less than 10,000km's on it. Dyno'd 210hp/190tq. New clutch at time of engine build, new sealed battery in trunk.

-h&r race on bilstein sports, new strut mounts, IE street camber plates, m3 offset CAB's, lemforder control arms, rear strut reinforcement plates, convertible front sway bar with m3 style mounting tabs, Ix rear sway, subframe with welded camber adjustment, new subframe bushings

-3.73lsd

-Hawk HPS Brake pads on Brembo Blanks, rebuilt front calipers, Stainless braided lines, m5 master cylinder, front brake hard lines are new, rear brake hard lines are new as well as most of the middle of the car.

-Wheels are unknown mesh's which look great, tires are done though.

-Dash has no cracks and is perfect!!! mtech1 wheel


The bad - Full disclosure
--------
-Body is far from mint, has the usual rust on the rockers, bit of rust on the windshield a pillar.
-Needs a wheel bearing
-exhaust leaks a bit under the cabin and it's loud.
-interior is from a sedan so the seats don't flip forward and the fronts are in pretty rough shape

oldschool
02-07-2013, 10:17 PM
photo of the dyno graph would be nice, looks like a clean swap. GLWS

Singe
02-07-2013, 11:23 PM
Nice setup, glws.

Chefskinny
02-16-2013, 06:18 PM
Thanks.

Bump It up. Price some what negotiable.

The Twin
02-16-2013, 08:12 PM
Very nice. What front valance is that under the front diving board ?

Chefskinny
02-17-2013, 01:54 AM
Thanks. It's a Pfeba Lip that's been modified by the PO.

Chefskinny
03-04-2013, 01:29 PM
Wheel bearing has been replaced, as well as shifter gasket installed so its much quieter in the cabin. If this doesn't sell I'll happily keep it.

Chefskinny
03-12-2013, 05:34 PM
Bump, nice weather is coming. Price is negotiable.

Chefskinny
03-18-2013, 06:17 PM
Bump, drop to $6500

Chefskinny
03-22-2013, 01:11 PM
Price negotiable, willing to take offers. Need this gone!

Chefskinny
04-02-2013, 10:24 AM
$5500?

El Gato Liso
04-02-2013, 12:12 PM
GLWS chef

Chefskinny
04-02-2013, 04:14 PM
^^^

Chefskinny
04-03-2013, 04:46 PM
any interest in a part out?

BrianM
04-05-2013, 12:16 AM
PM'ed. Please PM back. Thanks

Chefskinny
05-26-2013, 06:03 PM
Bump this up, car is now parked in Brampton and not being driven. Willing to take offers for someone to come get it.

$4500 for a ton of mods

royst
05-27-2013, 09:38 AM
Just sent PM if you didn't get it let me know.

drec
05-29-2013, 08:02 PM
PM'd

Chefskinny
06-19-2013, 10:30 AM
Bump

JJJames
06-28-2013, 05:34 PM
Beauty of a car - Interested! - more pics of body/interior? If its easier, can email to jkelsall@davis.ca

Chefskinny
07-25-2013, 08:57 AM
Bump. $4000 anyone?? Want this out of my parents driveway.

Chefskinny
07-30-2013, 09:47 AM
$3500!!!

87325I
08-12-2013, 05:07 PM
sent you a PM.

aviator
08-12-2013, 08:00 PM
Interested... pm sent