PDA

View Full Version : Fender Rolling


98bimmer
03-26-2012, 07:38 PM
Any one able to help me out with some fender rolling?

damameke
03-26-2012, 08:17 PM
Any one able to help me out with some fender rolling?

Go to StanceFactory.....Mike and Jay will gently rolled it...

98bimmer
03-26-2012, 09:39 PM
Go to StanceFactory.....Mike and Jay will gently rolled it...

Far away, if no ones local, ill go there

E36is
03-26-2012, 10:05 PM
^^ aluminum bat, move car back and forth. done.

damameke
03-26-2012, 11:09 PM
Far away, if no ones local, ill go there

It's a bit far, dont you always like to take the long way home in your BMW?
yes, you can always use the bat but you should see Mike and Jay worked in tandent, one heat the other roll.. odd couple.. lol..

sproule905
03-27-2012, 09:05 AM
wooden bat works better.

I love when guys complain about driving too far, when its a 30min drive to their shop (Stance)

98bimmer
03-27-2012, 12:14 PM
I guess ill be going to stance

Mystikal
03-27-2012, 12:48 PM
but you should see Mike and Jay worked in tandent, one heat the other roll.. odd couple.. lol..

Eiffel tower like two big black guys on a German chick. Actually that's exactly what it is.

Some say it's worth the drive. Come out and make the decision for yourself. *th-up*

dbworld4k
03-27-2012, 12:55 PM
^LOL. I can't believe I just read that.

Woofer
03-27-2012, 03:35 PM
Eiffel tower like two big black guys on a German chick. Actually that's exactly what it is.

Some say it's worth the drive. Come out and make the decision for yourself. *th-up*

Lmao

I've seen them at work when they rolled my bitch's rear lips. They were very gentle when breaking it in with heat lol

NOTORIOUS VR
03-27-2012, 03:52 PM
my buddy in Etobicoke lends out his fender roller tool for a reasonable fee... PM me for contact info... I just did mine 2 weekends ago.

https://lh3.googleusercontent.com/-5kD6FghLDf8/T2UD4-HemcI/AAAAAAAABKQ/3HFo0tJ2dhk/s912/IMG_20120317_133955.jpg

5ABIVT
03-29-2012, 08:22 AM
where can i find stance factory? IS rolling flaring the fender or are you folding up the inner lip so that it doesnt catch on a tucked tire?

SiR
03-29-2012, 11:16 AM
its both..it flares and folds the inner lip

5ABIVT
03-29-2012, 11:46 AM
would this break the paint on the inside and create spots for potential rust ? I wouldnt want that for a year round dd. ballpark cost/time figures??

Mystikal
03-29-2012, 01:14 PM
where can i find stance factory?

http://www.stancefactory.com/contact

flaring the fender

That is a fender "pull". We can do this.

...folding up the inner lip so that it doesnt catch on a tucked tire?

This is a fender "roll". This is the typical procedure, people only pull for VERY aggressive setups.

would this break the paint on the inside and create spots for potential rust ? I wouldnt want that for a year round dd. ballpark cost/time figures??

Not if done properly. $100 per axle and we'll have you in and out within the hour.

SiR
03-29-2012, 05:26 PM
would this break the paint on the inside and create spots for potential rust ? I wouldnt want that for a year round dd. ballpark cost/time figures??

heat gun...


just use phone books ;)