PDA

View Full Version : rx7 brake upgrade


clementine
03-07-2012, 09:39 AM
hello to all, i am planning on converting my brakes to the 4 piston rx7 calipers, and can have the adapter plates made for me, i was just wondering if there was any one else out there who would like to do this swap? i ask because the more adapters i get made the cheaper it comes out to per set, so if any one is interested, just let me know and ill get back to you guys with a price.
thanks
andrij

frankie591
03-07-2012, 10:35 AM
Depending on the price I may be interested. Just resealed my stock calipers but I've had rx7's on my mind for when my motor swap happens...

clementine
03-07-2012, 09:23 PM
cool well the current price for one set will cost me 75$ only because the guy i know will have to punch the drawing into the computer, but after he does that the price will get cheaper with every extra set added, so then, i can divide the full cost by the full amount of brackets and everyone wins :)

clementine
03-07-2012, 09:24 PM
hopefully we get more people

ihearte30s
03-08-2012, 10:43 AM
Hey, i've also been thinking about upgrading my brakes. If there's enough people to get a good price i'd be interested. Let me know

frankie591
03-08-2012, 11:01 AM
For me it'd have to be considerably less than 75 bucks. Laziness would motivate me to pay maybe 20 bucks a bracket, but other than that I'd machine it myself. Any pics of what the finished product would look like btw?

clementine
03-08-2012, 12:13 PM
currently no pics, but the guy that will be making the brackets runs a legitimate machining shop so i would assume that they will turn out fairly good. here are the drawing i sent him.
http://www.strathspey.co.uk/bb/phpBB3/viewtopic.php?f=6&t=7&st=0&sk=t&sd=a&start=20

clementine
03-08-2012, 12:15 PM
thanks again, ill leave this post running for a couple more weeks just to get a few more guys(hopefully) then we will take it from there

BJDC318
03-10-2012, 09:44 PM
Hey man $75 is a lot if your not in a hurry i can probably get the guys in the machine shop at school to make those up for you and all it would you cost is material. As long as that link you posted has all the right measurements then i can print that out for them and they can make them up. PM me if you want me to run it by the guys.
Brad

frankie591
03-10-2012, 10:50 PM
I'd be down if you can get that deal going. I checked around and those measurements seem to be pretty standard for all the rx7 upgrades I've seen.

BJDC318
03-10-2012, 10:55 PM
Ill see what i can do and ill keep you guys posted