PDA

View Full Version : Manual Tranny Shifting Problem


PinkieMoscow
03-02-2012, 07:25 PM
Hey guys, I just want to know if anyone has ever experienced this and can perhaps point me in the right direction. I have a `05 Lancer Ralliart which exhibits problems when shifting. The gears just don`t want to go into place sometimes and are very stubborn.

Sometimes I try to shift and it will not even want to, I`m simply not able to pop it in the gear unless I apply serious pressure and force it in. There is hardly ever a smooth transaction from 1st to second as I have to almost jam it in. Also when I try to put it in gear sometime it will just start to grind as if I didn`t press the clutch in. It seems as if the gears don`t line up properly.

Any and all feedback would be very much appreciated.

Thank you,
Val

cisco911
03-03-2012, 10:16 AM
I think your clutch is gone.

doogee
03-03-2012, 10:45 AM
I'd try bleeding the slave cylinder.

Gleb
03-04-2012, 10:35 AM
transmission mounts.

Blue530
03-07-2012, 10:09 AM
Doesn't Mitsubishi have a 10 year warranty or something? Why don't you take it to the dealer?

mudmojo
03-08-2012, 01:19 AM
Sounds like your driveline is not fully disengaged when doing a 1->2 shift?

I had an MY2005 Evo VIII. Never had that problem going 1->2 but going 4->5 was crunchy at times.

JINT
03-08-2012, 01:52 PM
transmission mounts.

huh? Lancer rallyart is fwd bro, tranny sits on the front subframe.

JINT
03-08-2012, 01:58 PM
I think your clutch is gone.

+1 on that

Kurt114
03-09-2012, 02:01 AM
http://www.hergoods.info/avatar4.jpgI`m simply not able to pop it in the gear unless I apply serious pressure and force it in. There is hardly ever a smooth transaction from 1st to second as I have to almost jam it in.

Gleb
03-11-2012, 03:04 PM
huh? Lancer rallyart is fwd bro, tranny sits on the front subframe.

Didn't realize that... But, I ain't your bro.

PinkieMoscow
03-12-2012, 06:10 PM
Thanks a lot for the replies gentlement, I was on vacation and couldnt tune in. I'm going to take it to mitsubishi on Wednesday for an indepth look. Hopefullly they'll have an answer for me.

boro92
03-12-2012, 08:26 PM
I'm going to say slave cylinder.
Sounds like a hydraulic issue. If you can adjust the pedals, you can start there if you're not comfortable with bleeding the system.

JINT
03-13-2012, 12:02 PM
Didn't realize that... But, I ain't your bro.

ok...

5style
03-13-2012, 12:53 PM
Didn't realize that... But, I ain't your bro.

http://smiliesftw.com/x/innoutrofl2.gif

bimmer325
03-31-2012, 10:28 PM
Read this. might help you understand a bit. http://www.drive-more-fix-less.com/transmissionprocess.html