View Full Version : E46 FS: 10 mm Rogue Engineering spacer - 2 piece

blue dragon
09-10-2011, 02:33 PM
With a normal 10mm spacer, there isn't enough lip to support the centre bore of a wheel in a hubcentric design. RE fixed this by designing a 2 piece spacer. Centre bore is 72.5mm


The small piece extends your hub so that the wheels remain hub centric and the hub carries the load, not the wheel lugs. The edges are chamfered, so you can pry them off without getting them stuck to the hub.

I can't use these anymore since the X5 ix 74.1 centre bore. These will fit E46 with the exception of the E46 Xi I think. Price is $80 and includes the longer bolts. PM me or email me wiward(at)rogers.com if interested. They are a little bit dirty, but I know you guys can clean them up :p

They fit like this


09-11-2011, 08:10 AM
Will the hub extender work on the rear hubs?

I need something like this for the rear but all hub extenders I see on the web says it's designed for the front only.

blue dragon
09-11-2011, 09:25 AM
I think this is for the front only, but you are welcome to try it. You can stop by my place and try it to see if it fits.

01-04-2012, 09:17 PM
Are they still available?

blue dragon
01-05-2012, 05:17 PM
These were sold awhile back