PDA

View Full Version : FS:2 alloy engines


dcramer
02-28-2011, 09:40 AM
I have a 2.5 alloy engine complete block number 436924C
and a 2.8 alloy engine disassembled same block number

Also a 2.8 iron block engine.

All offers considered

Dave

dave.a.cote
02-28-2011, 11:49 PM
What kind of engine? M52? M52TU? Might be interested.

dcramer
03-01-2011, 06:33 AM
Yes, they are M52TU engines. They came out of Z3's

Dave

dave.a.cote
03-01-2011, 02:38 PM
Too bad you don't have a non-TU aluminum M52...

dcramer
03-01-2011, 02:40 PM
To be honest, they are not my engines. I am selling them for a friend. I was guessing that they were TU engines based on a few assumptions. 1 they came out of z3's and the engine code. What was a non-TU aluminum engine used in ?

Dave

dave.a.cote
03-01-2011, 11:32 PM
I think that the only non-TU aluminum blocks in north america were from 1997 Z3's but I could be wrong. If it is a non-TU, I am still interested.

dave.a.cote
03-01-2011, 11:51 PM
Maybe 1996 to 1998 Z3's...

dcramer
03-02-2011, 06:31 AM
Any idea how to tell ? I know the TU's had dual vanos, but short of taking the valve cover off ?

dave.a.cote
03-02-2011, 09:40 AM
I could tell by a picture of the head

dcramer
03-02-2011, 09:42 AM
OK, with the valve cover on or off ? I'll get one this week.

Dave

dave.a.cote
03-02-2011, 10:51 AM
Valve cover on is fine

dcramer
03-03-2011, 09:20 PM
added pics

dave.a.cote
03-04-2011, 11:25 AM
Those are both TU engines - should be valuable for someone with an early e46. glws!

dcramer
03-27-2011, 08:10 AM
ttt

dcramer
02-13-2012, 08:35 PM
ttt

dcramer
04-02-2012, 12:15 PM
ttt