PDA

View Full Version : FS e30 twin can top mount manifolds


bluntheadtrauma
06-25-2010, 05:21 PM
Guys a small order of our manifolds have finally been delivered and we
have roughly 10 available for $650 each

These manifolds are a joint venture with Blunttech and Good &
Tight, bringing you the best product and customer service an E30
enthusiast could ask for. We are also currently working on a complete
bolt on kit with tune available for draw through and blow through
setups.


Some info.
-Manifolds are top mount and will fit any M5X/S5X based engines in our E30's.
-Made from 1/8" stainless steel.
-T3 based and designed to fit the large T04E compressor housing.
-External V band wastegate to fit up to 44mm gate.
-tig welded
-1/2" thick flanges
-will not interfere with your a/c.
-weigh is 18lbs meaning that it's a heavy duty manifold and not cheaply made.
-2 year warranty against cracking

For purchase info contact www.Blunttech.com

http://i3.photobucket.com/albums/y83/lisaotis/Picture007.jpg

http://i3.photobucket.com/albums/y83/lisaotis/Picture002.jpg

http://i3.photobucket.com/albums/y83/lisaotis/Picture005.jpg

I am currently running this manifold design on my bone stock 2.5 M50tu
and made 222rwhp/230rwtq on a DD on 8psi. Clutch started to slip on
the last pull.

http://i3.photobucket.com/albums/y83/lisaotis/dyno-1.jpg

propr'one
06-25-2010, 09:23 PM
fit iX?

bluntheadtrauma
06-26-2010, 11:58 AM
fit iX?

Im not certain but I will test fit one. We just confirmed they will fit e34 also. Ill get back to you

everlast
06-26-2010, 01:14 PM
+1 for blunt and all the involvement with the scene over these long years. these manifolds look amazing.

SamE30e
06-26-2010, 11:21 PM
fit iX?

Do you have a 24v iX?