PDA

View Full Version : Window won't go up...


craigIS
06-14-2010, 12:32 PM
The passenger side window on my 94 318 is stuck down, and won't go up. i have the door panel off but can't force the window up. For now, my main concern is to get the window up so I can drive my daughter around whatever the weather. Weird thing is though, when I press the window button down, you can hear clicking, but there is no sound when you press up.

How can I get the window up, 'til I replace the regulator?

InfiniteDice
06-14-2010, 01:13 PM
You need to take the motor off... it's most likely a few torx screws holding it on. One the motor is off the window transmission can be actuated by hand. Then reinstall the motor while it's up, or pop a couple bits of wood in there to hold it up.


Good Luck

craigIS
06-14-2010, 01:42 PM
Thanks. I'll give that a try.

craigIS
06-14-2010, 02:26 PM
Well, I can't seem to get to the screws.... anyone know what size torque is needed? any other suggestions?

328IScreamer
06-14-2010, 02:54 PM
size of torque = the one that fits

craigIS
06-14-2010, 03:31 PM
size of torque = the one that fits

Easy to say when you can't see or feel much, and you can't see anything Chris...lol

Trekz
06-14-2010, 05:22 PM
try jumping the motor with 12v maybe its a bad switch or somtn and not the motor.

propr'one
06-14-2010, 09:24 PM
^^correct.

craigIS
06-15-2010, 12:30 PM
^^correct.

except i think the motor works when you press the button down. Perhaps its a short or a wire somewhere?