PDA

View Full Version : ANYONE HAVE CLOSE UP PICS OF A/C Schnitzer, AND BREYTON BODY KITS (E30)???


Carlo
02-20-2002, 09:14 PM
Im trying to find some good close up pics but can't find any. Can some one help. mostly of the side skirts. Thanks

M54TU Schnitzer
02-20-2002, 09:55 PM
u want coupe or sedan?
anyway,, if u want sedan. here is my car.

EMPOWERD
02-20-2002, 10:22 PM
Breyton rear valance

EMPOWERD
02-20-2002, 10:27 PM
Breyton touring

EMPOWERD
02-20-2002, 10:28 PM
and of course....

Kevin's car!

EMPOWERD
02-20-2002, 10:29 PM
another one

EMPOWERD
02-20-2002, 10:30 PM
last one.... sorry no ACS pics.

M54TU Schnitzer
02-20-2002, 10:34 PM
oooopppppsssss :D

vodomagoo
02-20-2002, 11:05 PM
do the breyton rears retian somesort of 5mph shock or protection or jsut bolt on to the frame :huh?:

EMPOWERD
02-20-2002, 11:13 PM
Don't you have the Breyton rears Vodo? I thought it came with the BMP RS kit (I only see front pics of your car)..... in any case, the rear is just a valance that glues under the rear ('89 to '91) plastic bumper, so you don't need to worry about reinforcment. It's not like your front end... the Breyton's are only attached under both stock bumpers (see Straight_6's red car?)

vodomagoo
02-20-2002, 11:17 PM
the rear bmp part was all glass and i did not use it,
1. poor quialty
2.came cracked
3.if i got rear ended at no speed by by bumper and mabey frame damage(didnt wana risk it)
4.the gel coat realy sucked

so bassicaly i have a shrunken diving board but i need a glue on/bolt on valance for diving boards.

EMPOWERD
02-21-2002, 02:13 AM
Hmmm....

I completely understand now. What I would do if I were you, is (what Lukas88325is suggested) get a used original M-Tech rear bumper from a U.K. scrap yard and have it shipped over. If it's cracked... no matter because urethane is easily repairable. That rear bumper will flow nicely with your existing body kit and won't crack incase of fender benders.

Carlo
02-21-2002, 09:54 AM
nice, thanks for those pics,

vodomagoo
02-21-2002, 02:48 PM
but will it fit the pre plastic bupered cars?? i was thinking euro bumper w/mtech lower part that the older euro cars had