PDA

View Full Version : WTB late model parts: thermo housing, bracke duct, liners, etc


guibo
05-07-2009, 08:15 AM
here is a list of parts that im looking for in VERY good condition:

- aluminium thermostat housing (both halves)
- rear head aluminium coolant pipe
- alternator mounting bracket (the toothed one)
- fog light gasket, the round one that seals the bulb cover
- passenger brake duct, not the painted bumper one, black plastic long rectangular one
- both fender liners without tears
- window interupt switch
- vinyl shift boot
- spark plug wire plastic tube holder
- valve cover breather tube
- sunroof crank handle
- obc alarm horn, wiring, bracket, shield
- OEM late model radio wiring harness

FuryriderX
05-07-2009, 08:18 AM
might have the mounting bracket, brake duct, interrupt switch, shift boot and spark plug wire holder.

for the spark plug wire thing - are you talking about the plastic part that bolts to the valve cover, and keeps everything neat and tidy?

guibo
05-07-2009, 08:37 AM
might have the mounting bracket, brake duct, interrupt switch, shift boot and spark plug wire holder.

for the spark plug wire thing - are you talking about the plastic part that bolts to the valve cover, and keeps everything neat and tidy?

yes thats exactly what im talking about. the plastic lugs that the valve cover bolts go through cracked off on mine.

round up the parts you got and pm with an offer/pic if possible.

FuryriderX
05-07-2009, 10:06 PM
sounds good, i'll try and get it done tomorrow.