View Full Version : FS: ODB1 Dinan throttle body
JazzM
01-03-2009, 05:19 PM
Looking to get $350.00 for it.
They are 399 USD from dinan + your old one.
T.
ProStreetDriver
01-03-2009, 06:47 PM
what motor is it for???
JazzM
01-03-2009, 07:32 PM
S50 or M50 but will also work with ODB 1 converted S52 or M52
T.
INFAMOU$
01-03-2009, 09:50 PM
gains?
team_ottawa
01-03-2009, 10:09 PM
pics?
JazzM
01-03-2009, 11:57 PM
Dinan claims 8 hp and 12 lbs of torque
http://www.dinancars.com/store/product.php?productid=759&cat=454&page=1
T.
JazzM
01-04-2009, 07:28 PM
picture of actual throttle body:
http://i160.photobucket.com/albums/t172/jazzmz3/IMG_3246.jpg
T.
euroguy
01-04-2009, 08:46 PM
If you don't have any luck on here Tom, I sold mine within 5 minutes on bfc for a similar price.
JazzM
01-04-2009, 10:52 PM
Thanks Tom... I figured I'd try locally first.
T.
ClayMan
01-05-2009, 01:18 AM
What's the difference between an OBD1 and OBD2 throttle body?
JazzM
01-05-2009, 07:07 AM
it doesn't have a bracket for the ASC throttle body.
T.
328is
01-05-2009, 08:20 AM
i'd like to know what improvement you get buy putting only this. The dinan webstie clain 8hp/12lbs with "Dyno results for the combination of Stage 2 Engine Chip/Fuel Pressure Regulator, High Flow Cold Air Intake, Free Flow Exhaust and Throttle Body."
So, buy installing only the throtle body, you get what ?
bmwphatpat
01-05-2009, 11:35 AM
As the Dinan website implies, gains will be seen with supporting mods. If you slap this on a stock motor you may see a change in throttle response, but HP & tq gain would be limited.
JazzM
01-05-2009, 08:39 PM
The throttle body is 2mm bigger then the standard one and improves throttle response as well as top end power/torque.
Like mentioned above, dinan's claim is with supporting modifications and tuned stage 4 software.
T.
ClayMan
01-05-2009, 09:19 PM
it doesn't have a bracket for the ASC throttle body.
T.
Is that the only difference? Will it fit on a ASC-deleted (but still OBD2) S52 ?
JazzM
01-05-2009, 10:32 PM
the wholes for the manifold are the same, but I'm not sure if it will work with other parts ie TPS, cable linkage for throttle/cruise control, etc...
Perhaps someone can chime in on this.
T.
uber e36
01-06-2009, 11:56 AM
Basically, this is not the first mod someone would want to do... but if you have a bunch of other mods and need the engine to breath a bit more to maximize performance, this is a good thing to have.
vBulletin® v3.8.1, Copyright ©2000-2013, Jelsoft Enterprises Ltd.