PDA

View Full Version : FuryriderX's Shed Cleanout Thread! e30 content.


FuryriderX
11-19-2008, 12:09 PM
ok time has come to get rid of some of this stuff.

7k tach, $10
http://img208.imageshack.us/img208/5057/dsc063470516123ke1.jpg

window motors, $10 each
http://img208.imageshack.us/img208/1038/dsc063430480044ae9.jpg

cone air filter adapter (actually from an m10, but bolts to the m20 afm) $10
http://img140.imageshack.us/img140/126/dsc063420471862mx9.jpg

3 spoke steering wheel, in kinda rough shape. $15
http://img412.imageshack.us/img412/3310/dsc063400462447op3.jpg

more to come.

mirek
11-19-2008, 02:53 PM
got a centrallocking lock? drivers side drivers door

FuryriderX
11-19-2008, 03:01 PM
got a centrallocking lock? drivers side drivers door

no, i never took any of the doors apart. i do have the central brain, but not the actuators.

FuryriderX
11-19-2008, 03:56 PM
iX windshield washer tank, $60. comes with pump, but no level sensor
http://img167.imageshack.us/img167/9336/dsc063982846393pn0.jpg

cruise and turn signal stalks, wiring/connectors/writing is all good. no flasher relay included. $10 each
http://img511.imageshack.us/img511/3581/dsc063972830796nw9.jpg

throttle body boot (not cracked) $10, m20 coil $10, coolant level sensor $10, uncracked/unbroken spark plug wire holder $20, rad cap $5, outside temp sensor $5
http://img74.imageshack.us/img74/3499/dsc063962815819xe6.jpg

ABS computer from an iX, check the model number to see if yours is the same. It's the early style, with the external relay. $20
http://img530.imageshack.us/img530/6231/dsc063952806279jb5.jpg

full oil cooler setup from a 325i. direct plug and play to any m20 that doesn't come with a stock oil cooler (e.g. the eta's), as far as i know. $60
http://img167.imageshack.us/img167/2599/dsc063942796336jl5.jpg

i think this is a cold start valve for the really early e30's. check the part number to make sure. brand new in box. $5
http://img403.imageshack.us/img403/2843/dsc063932786029bm0.jpg
http://img511.imageshack.us/img511/7751/dsc063922771248iw9.jpg

L shape idle control valve. works fine. $10
http://img508.imageshack.us/img508/4287/dsc063912754956gg7.jpg

plastic grille from post-'88 lower valence. no cracked tabs. $5
http://img155.imageshack.us/img155/9711/dsc063892709767kq0.jpg

one blacked out kidney grill, one chrome kidney grille. blacked out one could use another coat of paint, i can do this before the purchase if you'd like. $15 for either.
http://img246.imageshack.us/img246/2302/dsc063882691859he6.jpg

FuryriderX
11-19-2008, 04:13 PM
k&n cone filter - fits the adapter above. $40
http://img156.imageshack.us/img156/1717/dsc063812580320gb2.jpg

aux electric fan - spins with some resistance, not tested. $20
http://img156.imageshack.us/img156/1751/dsc063802571227av5.jpg

master cylinder, reservoir, and level sender $60 (from an auto, but just clip off the seal and you can use it with a manual)
http://img155.imageshack.us/img155/5876/dsc063792561262mr3.jpg

325i throttle body + tps $20
http://img511.imageshack.us/img511/6596/dsc063782534085xp7.jpg

diy all red taillights - red is chipping slightly on one side, unnoticeable from 5ft. comes with seals and light tracks (not pictured), but no mounting hardware. $60 for all
http://img149.imageshack.us/img149/6150/dsc063662410008um8.jpg

e30 k&n drop in filter. just cleaned + re-oiled. $20
http://img529.imageshack.us/img529/2540/dsc063762514682ob9.jpg

radiator shroud - one top tab is broken, otherwise fine. $10
http://img511.imageshack.us/img511/974/dsc063752495762cm6.jpg

passenger foglight. lens is cracked, but the housing is perfect. great if you want to put new lenses on both lights and one of yours is damaged. $20
http://img246.imageshack.us/img246/4829/dsc063742486608nn8.jpg

325i radiator, from an auto (but can be used in a manual car too). no fan damage, no cracking/disintegration on the inlets/outlets. $80
http://img403.imageshack.us/img403/2554/dsc063732477189ny4.jpg

325i intake manifold (no injectors/fuel rail included) $60
http://img167.imageshack.us/img167/9370/dsc063722467246ww5.jpg

FuryriderX
11-19-2008, 04:36 PM
iX passenger side control arm (note this is an iX specific part!!) - inner ball joint is perfect, outer has a torn boot and should be replaced. $20
http://img511.imageshack.us/img511/4703/dsc063692437479lq3.jpg

windshield rubber seal and lockstrip. lockstrip isn't the right shape anymore, but thats probably because its cold. not broken or cracked. $40 for both.
http://img246.imageshack.us/img246/7915/dsc063672418889fu8.jpg

front and rear glass - front is original BMW, rear is too, i think. no cracks/chips, windshield has one sticker in upper left corner. $80 for front glass, $60 for rear. I WILL NOT SHIP THESE!
http://img403.imageshack.us/img403/9110/dsc063682429431bl7.jpg

iX front halfshafts - 2 passenger, one driver side. one of the passenger side shafts got some water on it, so has some surface rust on the inner shaft. a wire brush will get rid of it. other 2 are fine. i think only the drivers side needs a new boot, but you should replace them when you have the shafts apart anyways. they're cheap. shafts $120 each.
http://img153.imageshack.us/img153/1794/dsc063652397385ji5.jpg

rear plastic bumper cover (includes all trim, but no re-bar. long back piece is somewhat broken, and probably should be replaced, not pictured) $40
http://img511.imageshack.us/img511/8330/dsc063642388549sv5.jpg

14" weaves - tires are shot, but rims aren't bad. i have 3 center caps. nice light set of wheels for the track? $60
http://img404.imageshack.us/img404/4781/dsc063622365578wa2.jpg

premium sound front tweeters - one tweeter pin is broken, but the housings are in good shape, no broken clips/pins. $20 for both
http://img407.imageshack.us/img407/6357/dsc063602347422wj0.jpg

sachs clutch and pressure plate - came out of an iX, but i'm 99% sure it'll fit any m20b25. clutch disc looks brand new, check pics to confirm. only includes pressure plate and clutch disk, nothing else. $80
http://img209.imageshack.us/img209/3697/dsc063551426524uu5.jpg
http://img210.imageshack.us/img210/6906/dsc063561441993cz8.jpg
http://img246.imageshack.us/img246/1676/dsc063581470550zz0.jpg

FuryriderX
11-19-2008, 04:37 PM
m20 valve cover $10
http://img153.imageshack.us/img153/8596/dsc063712457198uk0.jpg

325i entire airbox, includes afm, rubber 'snorkel' hose, and k&n drop in filter. $40
http://img246.imageshack.us/img246/5506/dsc063702447420fe5.jpg

craz azn
11-19-2008, 05:09 PM
The fog is a passenger side bro. Yo, I'ma need that oil cooler grill for the valance. Hit you up on msn later :)

iignite
11-19-2008, 05:12 PM
hey bud, ill need that filter adapter and valve cover!

PM me with ur number and ill we'll find a time to meet up

FuryriderX
11-19-2008, 05:19 PM
The fog is a passenger side bro. Yo, I'ma need that oil cooler grill for the valance. Hit you up on msn later :)

edited, thanks. the grill is already spoken for, unfortunately. if he backs out you can have it.

p.s. love your new sig.

iignite, YGPM

mirek
11-19-2008, 05:31 PM
Got a part number for the coolant sensor?

FuryriderX
11-19-2008, 07:01 PM
filter adapter, valve cover, oil cooler grille and cone filter pending sale.

FuryriderX
11-19-2008, 11:07 PM
cold start valve, abs computer, tweeters pending sale

ellipsoid parts SOLD

FuryriderX
11-20-2008, 09:37 AM
Tweeters SOLD

oldskool3
11-20-2008, 09:45 AM
Hey greg any news on that ps pump? Thanks

FuryriderX
11-20-2008, 03:33 PM
pm'd

propr'one
11-20-2008, 04:44 PM
bump for greg!

everlast
11-20-2008, 06:39 PM
Washer tank sold to me, payment sent. :)

FuryriderX
01-15-2009, 09:04 AM
Still Available:

7k tach, $10
cruise and turn signal stalks, wiring/connectors/writing is all good. no flasher relay included. $10 each
throttle body boot (not cracked) $10, m20 coil $10, coolant level sensor $10, uncracked/unbroken spark plug wire holder $20, rad cap $5, outside temp sensor $5
full oil cooler setup from a 325i. direct plug and play to any m20 that doesn't come with a stock oil cooler (e.g. the eta's), as far as i know. $60
L shape idle control valve. works fine. $10
heated mirror glass - no discoloration or cracks. $20 for both.
foglight bracket. $5
aux electric fan - spins with some resistance, not tested. $20
master cylinder, reservoir, and level sender $60 (from an auto, but just clip off the seal and you can use it with a manual)
325i throttle body + tps $20
diy all red taillights - red is chipping slightly on one side, unnoticeable from 5ft. comes with seals and light tracks (not pictured), but no mounting hardware. $60 for all
radiator shroud - one top tab is broken, otherwise fine. $10
325i radiator, from an auto (but can be used in a manual car too). no fan damage, no cracking/disintegration on the inlets/outlets. $80
325i intake manifold (no injectors/fuel rail included) $60
iX passenger side control arm (note this is an iX specific part!!) - inner ball joint is perfect, outer has a torn boot and should be replaced. $20
windshield rubber seal and lockstrip. lockstrip isn't the right shape anymore, but thats probably because its cold. not broken or cracked. $40 for both.
rear plastic bumper cover (includes all trim, but no re-bar. long back piece is somewhat broken, and probably should be replaced, not pictured) $40
sachs clutch and pressure plate - came out of an iX, but i'm 99% sure it'll fit any m20b25. clutch disc looks brand new, check pics to confirm. only includes pressure plate and clutch disk, nothing else. $80

BimmerboyPH
01-16-2009, 11:01 AM
Hey ill take the cone filter adpater and the clutch, providing it will fit my 89 325is.

Pm me thanks, phil.

FuryriderX
01-24-2009, 01:29 PM
bump...

also have front and rear glass from a 325i - $80 for front $60 for rear
both OEM pieces, no cracks/chips

FuryriderX
02-01-2009, 01:35 PM
clutch sold, all other items still available.

FuryriderX
02-07-2009, 03:05 PM
bizump

FuryriderX
02-19-2009, 12:04 AM
Still Available:

cruise and turn signal stalks, wiring/connectors/writing is all good. no flasher relay included. $10 each
throttle body boot (not cracked) $10, m20 coil $10, coolant level sensor $10, uncracked/unbroken spark plug wire holder $20, rad cap $5, outside temp sensor $5
full oil cooler setup from a 325i. direct plug and play to any m20 that doesn't come with a stock oil cooler (e.g. the eta's), as far as i know. $60
L shape idle control valve. works fine. $10
heated mirror glass - no discoloration or cracks. $20 for both.
foglight bracket. $5
aux electric fan - spins with some resistance, not tested. $20
master cylinder, reservoir, and level sender $60 (from an auto, but just clip off the seal and you can use it with a manual)
325i throttle body + tps $20
diy all red taillights - red is chipping slightly on one side, unnoticeable from 5ft. comes with seals and light tracks (not pictured), but no mounting hardware. $60 for all
radiator shroud - one top tab is broken, otherwise fine. $10
325i radiator, from an auto (but can be used in a manual car too). no fan damage, no cracking/disintegration on the inlets/outlets. $80
325i intake manifold (no injectors/fuel rail included) $60
iX passenger side control arm (note this is an iX specific part!!) - inner ball joint is perfect, outer has a torn boot and should be replaced. $20
windshield rubber seal and lockstrip. lockstrip isn't the right shape anymore, but thats probably because its cold. not broken or cracked. $40 for both.
rear plastic bumper cover (includes all trim, but no re-bar. long back piece is somewhat broken, and probably should be replaced, not pictured) $40
front and rear glass from a 325i - $80 for front $60 for rear - both OEM pieces, no cracks/chips

FuryriderX
02-26-2009, 06:48 PM
ttt