View Full Version : FS: E46 Facelift Parts – clear signal lights, X3 shiftknob, pedals, ACS e-brake, xi s

02-19-2008, 02:15 AM
I have just parted with my E46 325xi!! :( I miss the awd in this weather… As sad as I am, I have a bunch of parts taken off from the car for sale.

Suspension For E46 xi series (both pre- and facelift) - $500
http://img208.imageshack.us/img208/6431/p1010218zr3.th.jpg (http://img208.imageshack.us/my.php?image=p1010218zr3.jpg)
http://img211.imageshack.us/img211/2632/p1010222zd9.th.jpg (http://img211.imageshack.us/my.php?image=p1010222zd9.jpg)
The suspension components include Rogue Engineering rear shock tower mounts (suitable for any E46), Koni yellow front and rear shocks and Eibach springs (designed for xi AWD cars). All installed at Cross Avenue Auto in Nov 06, the Konis are rusty from normal use, but I tried varying the front damping and took the car for spins around the block and they work great.

OEM X3 Aluminum shift knob - $80
http://img206.imageshack.us/img206/9652/p1010232hd9.th.jpg (http://img206.imageshack.us/my.php?image=p1010232hd9.jpg)
Real aluminum strip, gives the car a sportier feel. It should fit a lot of 1990+ BMWs with automatic transmission (from what I know, E36, E46, E90, X3, X5…) If your knob looks similar to this one it should fit, and will be plug and play.

OEM Aluminum pedals - $80
http://img206.imageshack.us/img206/7360/p1010235za4.th.jpg (http://img206.imageshack.us/my.php?image=p1010235za4.jpg)
For automatic transmission cars, sporty OEM pedals that blend in well with the car.

Front, side and rear signal lights - $300
http://img249.imageshack.us/img249/8558/p1010224ko4.th.jpg (http://img249.imageshack.us/my.php?image=p1010224ko4.jpg)
http://img341.imageshack.us/img341/163/p1010230ao0.th.jpg (http://img341.imageshack.us/my.php?image=p1010230ao0.jpg)
Lightbulbs and everything needed is included with these signal lights. Got these in one package at Pacific Mall Nov 06 for more than $500. I personally think these were the most important aesthetic mod to the car, since they clean the car up by removing all the amber yet are not overly intrusive styling-wise.

AC Schnitzer aluminum handbrake handle - $50
http://img442.imageshack.us/img442/5091/p1010229ai9.th.jpg (http://img442.imageshack.us/my.php?image=p1010229ai9.jpg)
Purchased in September 07 for $79 and installed in October, so the handle is barely used. A much sportier replacement for the leather e-brake on some cars, and even more stylish for those with plastic e-brakes like how I used to. Some people have complaints about this handle being hot in the summer and cold in the winter, which is true – but who really keeps their hand on their handbrake while driving?

Avanti Racing 17” ZHP Style replica rims (Rims Only) - $200
http://img99.imageshack.us/img99/973/xi2sq1.th.jpg (http://img99.imageshack.us/my.php?image=xi2sq1.jpg)
ZHP Style 17” replica rims, made by Avanti Racing. I don’t have a good picture of the rims themselves, but there are stone chips and slight curb rash from tracking. These would be a nice choice as winters or track rims. You could also see from this pic the amount of drop the Koni + Eibach combo gives the car.

Miscellaneous - $10 each (grommet bag / touch up paint)
side molding (car door strip) grommets and miscellaneous screws, bolts and fasteners. I used the grommets to refasten the side moldings after wrapping them with 3M automotive vinyl, but most were still intact so I didn’t use too many.
http://img404.imageshack.us/img404/106/p1010225xp0.th.jpg (http://img404.imageshack.us/my.php?image=p1010225xp0.jpg)
BMW OEM factory titanium silver touch-up paint. Not much to explain here, only used it once when I first got the car, but the stone chips kept appearing from hwy driving anyway.

All prices are negotiable, but please don’t low-ball. For any further inquiries, the best way to reach me is through email: mechyphawx@gmail.com. Local pick-up in either Mississauga or Waterloo only, although I may be able to arrange something in the GTA area as well, given advanced notice.

02-19-2008, 02:46 AM
Dibs on the rims and the touch-up paint. Thanks.

02-19-2008, 02:47 AM
I'll take the wheels. Cash in hand.

02-19-2008, 03:38 PM
Lots of interest in the rims, but uggh, sorry guys, honest mistake, the price was actually a typo. Should have been $400 instead. Moderators, please edit it in the original thread. Still a good deal tho!
Terribly sorry for the mistake everyone!

02-19-2008, 03:48 PM
two and four are 3 cm away.. or 1.5cm away if you used NumPad

too many interest and price pops up...

02-19-2008, 03:55 PM
hahahahah i wanted the rims but not anymore, was going to use them for my winter tires. Still a good deal though.

02-19-2008, 03:59 PM
Still a good deal though.

:confused::confused::confused::confused::confused: :confused:

try here : http://www.wheelmax.com/

02-20-2008, 04:50 PM
two and four are 3 cm away.. or 1.5cm away if you used NumPad

too many interest and price pops up...

Originally I was going to post them up for $500 negotiable (on num pad, 5 is directly above 2), but when I realized the mistake I figured $400 would be a more reasonable correction as this was my original baseline.

I Figured those who are on Max Bimmer FS threads don't go kindly on these types of mistakes, but it was an honest mistake and I'm not trying to con anyone. All I can say is sorry for misleading you guys, but this was the intended price...

02-21-2008, 10:35 AM
I tried to Pm you, but it doens't seem to work.

I am interested in the clear sidemarkers, let me know if you are willing to part with those separately and how much you want for them.

02-21-2008, 10:37 AM
I tried to PM you, but it doens't seem to work.

I am interested in the clear sidemarkers, let me know if you are willing to part with those separately and how much you want for them.

02-21-2008, 10:47 AM
Hey there Neb, I got your PM. I'd rather sell them in one set, but if no one jumps at it I wouldn't mind parting them out. Will give others a chance to take them all first :)

02-21-2008, 10:59 AM
im interested in the ACS handbrake handle. is it the real ACS?

02-21-2008, 12:07 PM
Yes it is real ACS. Bought the handbrake from Station 88 in Markham, and it comes with ACS packaging and everything.

02-22-2008, 01:49 AM
http://img141.imageshack.us/img141/7499/p1010417hv1.th.jpg (http://img141.imageshack.us/my.php?image=p1010417hv1.jpg)
http://img301.imageshack.us/img301/875/p1010411uf4.th.jpg (http://img301.imageshack.us/my.php?image=p1010411uf4.jpg)
http://img247.imageshack.us/img247/7908/p1010413aq1.th.jpg (http://img247.imageshack.us/my.php?image=p1010413aq1.jpg)
http://img244.imageshack.us/img244/7373/p1010414ao7.th.jpg (http://img244.imageshack.us/my.php?image=p1010414ao7.jpg)
http://img245.imageshack.us/img245/5278/p1010415rw2.th.jpg (http://img245.imageshack.us/my.php?image=p1010415rw2.jpg)

Here are some pics of the rims – I just took the tires off from them, but my new ride could only fit 3 of these and two tires (will have to make another trip to the shop for the last rim and the other two tires)

Of the three that I brought home, one of them is mint, and two have curb rash on it. I took a pic of the more serious rash, the other one is around half the length and not as deep, but for salt covered winter rims or dirt covered track rims it won’t be too noticeable. I also took a pic of a stone chip on one of the rims – it was the biggest one I could find, but expect around 3 to 6 chips of that size per rim. You’ll notice from the pics of the full rim that these chips and rashes aren’t noticeable from afar.

Once I get the last rim back I will take pics of that one and post.

02-22-2008, 08:53 PM
Suspension For E46 xi series (both pre- and facelift) - $500

OEM X3 Aluminum shift knob - $80

OEM Aluminum pedals - $80

Front, side and rear signal lights - $300

AC Schnitzer aluminum handbrake handle - SOLD

*New Price* Avanti Racing 17” ZHP Style replica rims (Rims Only) - $330
decided to drop price after I inspected the rims and found that big curb rash.

Miscellaneous - $10 each (grommet bag / touch up paint) - Sale pending

04-28-2009, 02:25 AM
I need an auto shift knob but the picture you put up does not show up.

If the shift knob is still available, I'd like to see it.