PDA

View Full Version : FS: E46 Widebody Kit


djeurofest1
02-16-2008, 01:43 PM
hey guys i bought a Widebody kit, which i wanted to install on my 4 dr BMW.
its for a coupe, and i thought i would custom make it fit, but its too much work and i need my car for the spring and summer.

it is a 8 peice kit.

1 Front Bumper
2 Front Fenders
2 Side Skirts
2 quarterpanel attachments
1 Rear Bumper (m3 style)

i am looking to get some money back out of it, i bought it in california and had it shipped to port huron and went to pick it up.

looking to get at least 1800 bucks for it, which is cheap... you won't find a kit for that price anywhere!

http://i159.photobucket.com/albums/t156/mspcl/99-05%20E46%208pc%20Widebody/uberm303_03.jpg
http://i159.photobucket.com/albums/t156/mspcl/99-05%20E46%208pc%20Widebody/uberm303_01.jpg
http://i159.photobucket.com/albums/t156/mspcl/99-05%20E46%208pc%20Widebody/uberm303_06.jpg
http://i159.photobucket.com/albums/t156/mspcl/99-05%20E46%208pc%20Widebody/uberm303_08.jpg
http://i159.photobucket.com/albums/t156/mspcl/99-05%20E46%208pc%20Widebody/uberm303_09.jpg
http://i159.photobucket.com/albums/t156/mspcl/99-05%20E46%208pc%20Widebody/2340867_17_full.jpg
http://i159.photobucket.com/albums/t156/mspcl/99-05%20E46%208pc%20Widebody/2340867_7_full.jpg



this is what i was after, same kit... i wanted to shave off a bunch of stuff and make it look similar to this car
http://www.azevedomotorsports.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=6945&g2_serialNumber=1

JazzM
02-16-2008, 02:01 PM
nice kit, personally i think the GTR look is a bit too much unless the car itself has a bit more under the hood to go along with the looks.

Good luck with the sale!

T.

Soldo
02-16-2008, 03:18 PM
Is this kit for a coupe or E46 M? Cause the rear fenders would be different, no?

djeurofest1
02-16-2008, 04:24 PM
i believe its for the e46M

but the rear is only a flare... so since you are molding it in, wouldn't be much more work to do it to a non M

bimmerjoe
02-16-2008, 07:04 PM
holy shit somone pick this kit up!!!!! wicked buy

Mikeee46coup
02-17-2008, 12:26 AM
Bump for an honest/relaible seller! *th-up*

Romaz
02-17-2008, 01:38 AM
would this kit fit a cabrio?

shimajer
02-17-2008, 10:36 AM
pretty sure it will, its the same as a coupe.

Mikeee46coup
02-17-2008, 12:40 PM
would this kit fit a cabrio?

OMG that would look insane *rockout**rockout**rockout*

AceOfSpades
02-17-2008, 01:18 PM
would this kit fit a cabrio?

DOETTTT!!!!!!!!

Romaz
02-18-2008, 09:57 AM
I’m thinking about it, I just need to figure out how much the install will run me.

djeurofest1
02-18-2008, 10:39 PM
bump

shimajer
02-18-2008, 11:17 PM
no more widebody? or custom?

djeurofest1
02-19-2008, 05:59 AM
i am going custom.

too much work to fit it.

2 dr stuff is totally different then 4dr.

fenders don't line up, bottom of fenders are longer cuz of it skirts won't really line up. the rear flares would have to overlap the doors by a lot. etc and i didn't try the bumpers yet.

i would have to cut up and use peices of the widebody, so i'm just gonna go custom

therock
03-10-2008, 01:56 PM
hi, what material is this? im interested in it for my m3. Oh and i read a question up there that how much would install run ... about ... $5000 - $6000 ... pretty much the whole car needs to be repainted and the rear fenders need to be moulded onto body.

JNSchnitzer
03-10-2008, 04:39 PM
Iím thinking about it, I just need to figure out how much the install will run me.

Don't forget to factor in the cost of wiiiiider rims ;)

djeurofest1
03-10-2008, 10:54 PM
hi, what material is this? im interested in it for my m3. Oh and i read a question up there that how much would install run ... about ... $5000 - $6000 ... pretty much the whole car needs to be repainted and the rear fenders need to be moulded onto body.

the kit is made out of fiberglass... like almost all widebody kits.

also it would be a good idea to have the car completly repainted.
depending on which shop you go to. but 5000 seems about right (unless you take it to like a shop like macco)

therock
03-11-2008, 02:32 PM
Well if you dont want to get wider rims you just get spacers ... ive seen it done on a guys wide body m3 with stock 18'ss

Don't forget to factor in the cost of wiiiiider rims ;)

therock
03-11-2008, 02:33 PM
shit, i would have taken it if it wasnt fiberglass. Damm...

the kit is made out of fiberglass... like almost all widebody kits.

also it would be a good idea to have the car completly repainted.
depending on which shop you go to. but 5000 seems about right (unless you take it to like a shop like macco)

djeurofest1
03-11-2008, 08:02 PM
since you got a m3

what i would do, is use ur bumpers and just mold the wider parts in onto ur current parts.
also i would make the quarterpanel inserts with metal and use the current panel as a reference.

thats what i was planning on doing with mine, but 2dr and 4 dr are completly different and nothin would work.

so i had to make the shop make mine.... but it takes too much time for them and too much money for me.

djeurofest1
03-24-2008, 04:30 AM
bump